Wire EDM machineCHARMILLES
Robofil 2030 SI

د ماشین په اړه معلومات
- د ماشین نوم:
- Wire EDM machine
- تولیدوونکی:
- CHARMILLES
- موډل:
- Robofil 2030 SI
- د ماشین شمېره:
- 124322
- د جوړېدو کال:
- ۲۰۰۲
- حالت:
- د استعمال لپاره چمتو (استعمال شوی)
- فعالیت:
- په بشپړه توګه فعال
تخنیکي جزییات
- د کاري ټوټې اعظمي وزن:
- ۵۰۰ کيلوګرام
- د X محور سفر فاصله:
- ۳۱۸ م م
- د Y محور مسافه:
- ۲۱۸ م م
- د Z محور د حرکت فاصله:
- ۱۱۴ م م
برابروونکی
- ځای:
- Haskovo, بلغاریا
– واټن: شاوخوا ۳٬۷۶۵ کیلومتره
- شتون لري:
- سملاسته د لیلام تر پای ته رسېدو وروسته
- د لېږد شرایط:
- FCA
€ ۵۰۰٫۰۰ (الزامي)
وړيا
تشريح
TECHNICAL DETAILS
X-axis travel: 318 mm
Y-axis travel: 218 mm
Z-axis travel: 114 mm
U-axis travel: ± 48 mm
V-axis travel: ± 48 mm
Control system: PC-based, 14" color monitor, MS-DOS
Cone pitch/height: ±30° / 65 mm
Workspace
Type: Tub with swing door
Max. workpiece dimensions (W × D × H): 1,130 × 510 × 260 mm
Door width: 1,010 mm
Max. workpiece weight: 500 kg
Table dimensions (W × D): 560 × 440 mm
Distance floor to table: 1,050 mm
Dielectric volume: 240 l
Dielectric level control: Automatic
Wire EDM system
Wire diameter: 0.10 – 0.25 mm
Wire guide type: Diamond-enclosed guide, backlash-free
Programmable wire unwinding speed: 0.2 to 15 m/min
Programmable wire tension: 0.3 to 3 daN
Permissible coil weights and types (according to DIN): 1.6 kg
Permissible coil weight and types (according to JIS): 3 kg
Recovery of used wire: Wire shredding at the back
Automatic threading for wire diameters: 0.050 to 0.300 mm
Automatic rethreading for wire diameters: 0.070 to 0.300 mm
Minimum hole diameter for threading: 0.300 mm for 0.250 mm wire
dielectric
Type: Deionized water
Total volume of the dielectric: 900 l
Dielectric temperature: ±0.5 °C
Cartridge filters: 16
Volume of deionizing resin filling: 30 l
Deionization control: Automatic
Number of deionization bottles: 3
Spray pressure range: 0 – 20 bar
Number of programmable pressure levels: 16
generator
Max. processing speed (material: steel, wire: SW30X): 300 mm²/min
Min. surface roughness (material: steel, height: 20 mm): 0.12 µm Ra
Min. surface roughness (material: carbide, height: 20 mm): 0.1 µm Ra
Available technologies: steel, cemented carbide, copper, graphite, aluminum, PCD, copper-tungsten
MACHINE DETAILS
Machine dimensions (L × W × H): 3,690 × 2,520 × 2,290 mm
Weight (without dielectric): 4,400 kg
Input voltage: 380/400 V
Power consumption: 12 kVA
دغه اعلان په اتوماتيک ډول ژباړل شوی. د ژباړې تېروتنې کېدای شي موجود وي.
اسناد
د تادیاتو پروسس کول
- د پیرود اضافي لګښتونه:
- ۱۸ %
- د تادیې شرایط:
- ٪۱۰۰ مخکینی تادیه
- د تادیې طریقې:
بانکي انتقال
د وړاندیز توضیحات
- اعلان ID:
- A18821486
- د حوالې شمېره:
- AUC-2503138
- تازه کول:
- وروستي ځل په ۲۰.۰۱.۱۴۰۴
- ځانګړې وړاندیز:
- یوازې په لیلام کې شته
کتنه
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of ۱۸ % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.