Feeding technology / feeding system / bowl feeder, vibratory feeder for screwdriving technology; vib

DEPRAG 0622-P/0,75-1S

Feeding technology / Feeding system / Vibratory feeder / Sorting unit / Bowl feeder
Vibratory bowl, sorting device / Screw feeding with vibratory feeder for screw technology
Feeding system DEPRAG Type: 0611-P/0.75-1S
No.: 1183885 Year: 2011 - 2012
The system was used for feeding electrical connector pins.
Product dimensions: Ø 4 mm, length 39 mm
The pins are preloaded in the material hopper; the feed belt conveys the pins as required into the bowl feeder.
From the bowl feeder, the product is transferred via the linear feeder to the product inverter.
The product inverter orients the product into the correct position and makes it available for further processing.
The unit comes from a prototype system; the external electrical control unit is not present and should be replaced by a PLC.
Without modification, for example, suitable for the automatic and properly oriented feeding of threaded pins up to M4 x 40.

The unit consists of the following components:

Isdokpwuuspfx Abksbc
1 piece belt hopper / feed conveyor DEPRAG
Type: B 10
Serial no.: 1178201 Order no.: 415050A Year: 2011
Fill volume: 10 liters
Belt speed: 100 mm/min.
Operating voltage: 24 V (DC)
- Belt surface dimpled
- Foldable stainless steel chute
Weight 11 kg

1 piece bowl feeder KENDRION
Type: OA C006.504101 / OA C006029 / KQF 465 B5
Bowl diameter (top): 200 mm
Bowl diameter (bottom): 100 mm
Bowl internal height: approx. 75 mm
Sorting track width: approx. 5 to 8 mm
Operating voltage: 230 V, 50 Hz.

1 piece DEPRAG vibratory controller for the bowl feeder
Type: SZG Controller 6
Serial no: 35 pieces linear feeder KENDRION
Type: WS3B/36
Part no: WSB003,564025
Operating voltage: 230 V, 50 Hz.

1 piece DEPRAG vibratory controller for the linear feeder
Type: SZG Controller 6
Serial no: 35 pieces product inverter FESTO with 180° swivel range
- 1 piece FESTO valve block CPV10-VI 18200
- Compressed air requirement approx. 6 bar

- 1 piece MURR base module type MVP12
- Complete unit mounted on a steel plate with 4 support legs

Space requirements (L x W x H): 1150 x 520 x 860 mm
Weight: 100 kg
Very good condition

دغه اعلان په اتوماتيک ډول ژباړل شوی. د ژباړې تېروتنې کېدای شي موجود وي.