Strength grading machine C24(C40) & TR26Dynalyse
Dynagrade
Strength grading machine C24(C40) & TR26
Dynalyse
Dynagrade
EXW ثابت قیمت د مالياتي ارزښت له مالیې سره علاوه
€ ۱۴٬۹۹۹
حالت
استعمال شوی
ځای
Kalme 

انځورونه ښیي
نقشه ښکاره کړئ
د ماشین په اړه معلومات
- د ماشین نوم:
- Strength grading machine C24(C40) & TR26
- تولیدوونکی:
- Dynalyse
- موډل:
- Dynagrade
- د ماشین شمېره:
- 057
- حالت:
- ډېر ښه (استعمال شوی)
- فعالیت:
- په بشپړه توګه فعال
بیه او موقعیت
EXW ثابت قیمت د مالياتي ارزښت له مالیې سره علاوه
€ ۱۴٬۹۹۹
- ځای:
- Kasumetsa tee, Kalme, 61002 Tartu maakond, Estonia

تماس وکړئ
د وړاندیز توضیحات
- اعلان ID:
- A17542298
- تازه کول:
- وروستي ځل په ۰۷.۰۸.۱۴۰۴
تشريح
New price ca 100 000.- EUR
The Dynagrade equipment is a product for on-line strength grading of structural
timber (lumber), grades from C16 until C40 (most usual is C24) and TR26 for UK market
.
It is especially suitable for installation in sawmill sorting lines or planing
mills or comparable plants where sawn (or planed) timber is transported by means
of an existing cross-conveyor system.
The grading is done with resonant frequency ("knocking" with hammer and measuring the sound frequency with microphones).
Very high productivity, can handle up to 100pc/minute (400m/min if avg. length is 4,0m).
Main prerequisites:
Pedou Dnf Ispfx Ad Uegu
Limber/timber size and length 1):
Thickness 19-110 mm, Width 60-300 mm, Length 1200-7200 mm
Sawn or planed surface
Dried lumber/timber, cut to angle
Required space: less than 1 meter (3 ft) of a transfer line with lugged chains (standard)
The Dynagrade equipment is a product for on-line strength grading of structural
timber (lumber), grades from C16 until C40 (most usual is C24) and TR26 for UK market
.
It is especially suitable for installation in sawmill sorting lines or planing
mills or comparable plants where sawn (or planed) timber is transported by means
of an existing cross-conveyor system.
The grading is done with resonant frequency ("knocking" with hammer and measuring the sound frequency with microphones).
Very high productivity, can handle up to 100pc/minute (400m/min if avg. length is 4,0m).
Main prerequisites:
Pedou Dnf Ispfx Ad Uegu
Limber/timber size and length 1):
Thickness 19-110 mm, Width 60-300 mm, Length 1200-7200 mm
Sawn or planed surface
Dried lumber/timber, cut to angle
Required space: less than 1 meter (3 ft) of a transfer line with lugged chains (standard)
عرضوونکی
یادونه: وړیا راجستر شئ یا ننوت کړئ، ترڅو ټول معلومات ترلاسه کړئ.
پوښتنه واستوئ
تلیفون & فاکس
+372 510 ... اعلانونه
ستاسو اعلان په بریالیتوب سره پاک شو
يوه تېروتنه رامنځته شوه















