Double-column stamping press with NC roll feed; eccentric press, eccentric production press

EBU - Eisenwerk Hensel HK 130 Z

Double-column punching press EBU - Eisenwerk Hensel Type HK 130 Z
Eccentric punching press, eccentric press
Mach. No. P 54096 / 96, built in 1996
Pressure force 130 tons
Table size 1200 x 880 mm
Stroke adjustment 8 to 140 mm
Ram adjustment 100 mm
Ram surface 1150 x 800 mm
Table opening (support edge) 450 x 350 mm
Table opening (through hole) 440 x 235 mm
Column width 1200 mm
Column width across 595 mm
Installation height of maximum stroke of ram at TDC max. 510 mm (ram adjustment at top)
Installation height of maximum stroke of ram at BDC max. 370 mm (ram adjustment at top)
Stroke rate 40-120 strokes/min.
Table height above floor: 900 mm
Main drive motor power: 15 kW
Hydraulic motor power: 2.2 kW
Total current consumption: 40 amps
Power supply: 400 volts, 50 Hz
- Hydraulically operated multi-disk wet clutch and spring-loaded safety brake
- Continuously adjustable drive via frequency converter (120 strokes at 80 Hz)
- Hydraulic overload protection
- Automated stroke adjustment
- Motorized ram height adjustment with digital actual value display
- Pneumatic, continuously adjustable ram weight counterbalance
- Electrical cabinet adjacent (120 x 40 cm x height 220 cm)
- Electric two-hand operation for stroke release
- Movable Plexiglas safety door on the operator side, with pneumatic opening
- Lubrication unit for circulating oil lubrication (fixed to the machine)
- Hydraulic unit for the clutch-brake combination (fixed to the machine) Machine)
- UNIDOR APS-Mini tool monitoring system, shown opposite
- Operating instructions and documentation for the press available as PDF
- Electrical circuit diagram available

Included:
EBU roller feed unit, type EVS 320
Order No.: ZT01054949 / 96, built in 1996
Strip width: 320 mm
Strip thickness: max. 4 mm
Strip cross-section: max. 1000 mm²
- Feed control via the SIEMENS machine control system
- Programmable feed path from the roller feed system
- Control panel for feed system with Siemens S5 control system with OP 15, shown opposite

Space requirement for press with feed system: L x W x H 380 x 180 x 375 cm
Space requirement for control cabinet: L x W x H 125 x 41 x 200 cm, approx. 450 kg
Gujdpfx Abewa D Npsksh

Transport dimensions of the machine with control cabinet and disassembled drive motor: L x W x H 400 x 230 x 343 cm
Height with drive motor: 375 cm
Height without drive motor: approx. 343 cm

Weight: 18 tons
Good condition

دغه اعلان په اتوماتيک ډول ژباړل شوی. د ژباړې تېروتنې کېدای شي موجود وي.