Vertical single-spindle turning center

EMAG VL 400 (Siemens)

Vertical Single-Spindle Turning Center - Vertical Lathe

Manufacturer: EMAG
Model: VL 400 (Siemens)
Year of Manufacture: 2021
Operating Hours: approx. 1,848

Hfjdpfx Absvq Iwyoksn
Turret Base Unit and Cross-Slide Unit with Y-Axis

HP Turret Drive Unit for Driven Tools (C442) with internal coolant supply to the tool
Maximum speed: 6,000 rpm
Corner speed: 3,200 rpm
Tool carrier unit for driven tools: 12 x BMT75

Rotary Workpiece Transport System, O-Design
Drag Frame System for 10 workpieces
Workpiece height (incl. pallet): max. 300 mm
Workpiece weight: max. 60 kg

Set (10 pieces) drag frames for O-band
For workpiece diameters: 150 - 400 mm

Blow-off Device for workpiece and clamping device (Pick-Up)

Coolant Supply: 15 bar
Coolant Pump Delivery Rate approx. 80 l/min at 15 bar
Cooling Unit (6.5 kW, water-air)
A cooling unit (with dual-circuit technology) regulates the machine's thermal management.
Spindle drive, control cabinet, and turret are maintained at ambient temperature (10°C - 40°C).

Double Coolant Filter, manually switchable
Filter fineness 100 µm, with electrical and mechanical contamination indicators

Chip Conveyor
Hinged belt design: rear discharge
Chip discharge height 1,100 mm (with integrated coolant tank, approx. 500 l capacity)

Emulsion Mist Extraction: Extraction capacity approx. 800 m³/h
Rinsing Gun

Workpiece Measurement with measuring probe
Probe blowing device
Tool life monitoring (sister tool management)

Tool Breakage Monitoring: TOOLINSPECT MCU-EUROPA (SIEMENS 840Dsl, FANUC 31i/32i)

Three-Color Signal Tower

Axial Drilling-Milling Head – BMT75 CC
5x Angle Drilling-Milling Head 90° – BMT75 CC (i=1:1)
Set of tools for OP10 + OP20

Hydraulic Power Chuck Cylinder, size 150 – with 1 media transfer
Max. clamping force 10,850 daN at 70 bar

Coolant Through Spindle
Programmable Clamping Pressure Adjustment

3-Jaw Power Chuck KNCS-N 500-155 Quick Change
Max. = 2,200 rpm (Reference speed according to DIN 6386)
Set of hard jaws
Set of soft top jaws

Attachments for KNCS-N 500-155
Flushing nozzle in chuck bore

Additional Tool Holders with Tools:
1x 8.BMT25VL8IKX50 Finishing Tool External
1x 8.BMT25VL8IKX50 Roughing Tool External
1x 60.7516VL8IKDI15 Engraving Tool
1x 60.7516VL8IKDI15 Thread Tap Holder
1x 40.75V5KRVL8IKD Face Milling Cutter 50 mm
3x 80.75V5VL8IKD Boring Bar Holder
2x 27.V520HYDL26 Drill, diameter 20 mm
1x 42.V522L08Ik Drill, diameter 22 mm
1x 27.V514WNL31 Drill, diameter 14 mm

Software package
Operating manual / Maintenance manual
151025ä

دغه اعلان په اتوماتيک ډول ژباړل شوی. د ژباړې تېروتنې کېدای شي موجود وي.