Lead/traction spindle latheEmco Emcomat
EM20D
Lead/traction spindle lathe
Emco Emcomat
EM20D
VB د مالياتي ارزښت له مالیې سره علاوه
€ ۱۶٬۵۰۰
د جوړېدو کال
۱۹۹۵
حالت
استعمال شوی
ځای
Ubstadt-Weiher 

انځورونه ښیي
نقشه ښکاره کړئ
د ماشین په اړه معلومات
- د ماشین نوم:
- Lead/traction spindle lathe
- تولیدوونکی:
- Emco Emcomat
- موډل:
- EM20D
- د جوړېدو کال:
- ۱۹۹۵
- حالت:
- ډېر ښه (استعمال شوی)
- فعالیت:
- په بشپړه توګه فعال
بیه او موقعیت
VB د مالياتي ارزښت له مالیې سره علاوه
€ ۱۶٬۵۰۰
- ځای:
- Großer Sand 19-21, 76698 Ubstadt-Weiher, DE
تماس وکړئ
د وړاندیز توضیحات
- اعلان ID:
- A18880431
- تازه کول:
- وروستي ځل په ۰۶.۰۴.۱۴۰۴
تشريح
Emcomat Emco EM20D Lead and Feed Lathe, built in 1995, in excellent condition, CE compliant!
Ijdpfxowag Sto Abkotn
Technical specifications:
>> Year of manufacture: 1995
>> Center height 200 mm
>> Swing over bed 400 mm
>> Swing over cross slide 250 mm
>> Turning length: 1000 mm
>> Spindle speed: 4 speed levels, continuously variable from 35-3000 rpm
>> Quill stroke 120 mm
>> Tailstock: MT3
>> Spindle bore: 50 mm
>> 20 longitudinal feeds 0.045 / 0.787 mm/rev
>> 20 cross feeds 0.023 / 0.406 mm/rev
>> Space requirements / installation dimensions approx. length 1.900 x depth 0.9 x height 1.3 meters
>> Weight approx. 850 kg
Accessories and equipment:
>> 3-axis position indicator
>> 1 piece Three-jaw chuck with 1 set of jaws
>> Tool holder with 3 pockets
>> Chip return wall
>> Coolant system
>> Bed stop
About the machine:
Offered is an Emcomat 20D centerline and feed spindle lathe, built in 1995, in lightly used condition. The machine is fully functional. All slides run very smoothly and evenly. The bed guides are in very good condition. Take advantage of the opportunity to view this machine on-site under power and see for yourself its condition.
دغه اعلان په اتوماتيک ډول ژباړل شوی. د ژباړې تېروتنې کېدای شي موجود وي.
Ijdpfxowag Sto Abkotn
Technical specifications:
>> Year of manufacture: 1995
>> Center height 200 mm
>> Swing over bed 400 mm
>> Swing over cross slide 250 mm
>> Turning length: 1000 mm
>> Spindle speed: 4 speed levels, continuously variable from 35-3000 rpm
>> Quill stroke 120 mm
>> Tailstock: MT3
>> Spindle bore: 50 mm
>> 20 longitudinal feeds 0.045 / 0.787 mm/rev
>> 20 cross feeds 0.023 / 0.406 mm/rev
>> Space requirements / installation dimensions approx. length 1.900 x depth 0.9 x height 1.3 meters
>> Weight approx. 850 kg
Accessories and equipment:
>> 3-axis position indicator
>> 1 piece Three-jaw chuck with 1 set of jaws
>> Tool holder with 3 pockets
>> Chip return wall
>> Coolant system
>> Bed stop
About the machine:
Offered is an Emcomat 20D centerline and feed spindle lathe, built in 1995, in lightly used condition. The machine is fully functional. All slides run very smoothly and evenly. The bed guides are in very good condition. Take advantage of the opportunity to view this machine on-site under power and see for yourself its condition.
دغه اعلان په اتوماتيک ډول ژباړل شوی. د ژباړې تېروتنې کېدای شي موجود وي.
عرضوونکی
یادونه: وړیا راجستر شئ یا ننوت کړئ، ترڅو ټول معلومات ترلاسه کړئ.
له دې نیټې راجستر شوی: 2007
پوښتنه واستوئ
تلیفون & فاکس
+49 7251 ... اعلانونه
ستاسو اعلان په بریالیتوب سره پاک شو
يوه تېروتنه رامنځته شوه