د ټیټ بار وړلو سیمی ټریلر

FAYMONVILLE MAX 710 Tiefbett 2+4 PA

You can find our complete inventory of vehicles, including units available immediately and at short notice, on our website.

Overview of equipment. Full equipment list available on request.

Neck (gooseneck):
* Hydraulically liftable/lowerable and removable gooseneck, length approx. 3,650 mm
* 2 pairs of fold-out lashing rings (LC 5,000 daN)
* 2 pairs of lashing rings on the gooseneck (LC 10,600 daN)
* 1 pair of lashing rings in the center section of the gooseneck (LC 10,600 daN)
* For 6x4 or 8x4 2-axle tractor units

Compact front bogie:
* Hook pick-up front and rear, length: approx. 2,200 mm
* Bogie width: approx. 2,850 mm

Excavator deck:
Telescopic excavator deck with drive-over deck hooks at the front and bolt-lug coupling at the rear
* Basic width: approx. 2,850 mm
* Length: approx. 6,650 mm
* Beam height: approx. 400 mm
* Beam width: approx. 1,350 mm
* Loading height approx. 550 mm with ground clearance of approx. 150 mm

4-axle rear bogie:
* Mechanical bolt-lug coupling at the front for mounting a lowbed
* Rear crossmember bogie width: approx. 2,850 mm
* Bogie length: approx. 5,480 mm

Pendulum axles, all axles hydro-mechanically steered
* Technical axle load: 14,640 kg each (62 km/h)
* Hydraulic axle compensation

Tyres:
* Front bogie:
* 8 x manufacturer’s choice (M+S) 285/70 R19.5
* Rear bogie tyres:
* 16 x manufacturer’s choice (M+S) 285/70 R19.5
* Load index 150/148J

Paintwork:
* Complete steel construction is automatically blasted with a blasting wheel system after welding. Second blasting with corundum for optimal adhesion of the coating system
* Full chassis HRM-metallized with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection
* Final painting with two coats of 2K topcoat, single-color in RAL 3002 carmine red, according to RAL system 841GL

Including the following accessories:
* Steel front wall, approx. 400 mm high
* Plug-in ALU sidewalls and rear wall, approx. 400 mm high, anodized version, fitted on the gooseneck
* 3.5 inch kingpin
* Truck hydraulic connection with flow control (20 l/min)
* Support gallows for supply lines, tractor unit tank must be at least 80 l
* with MAX Trailer couplings, otherwise customer to supply coupling parts ex works
* BEKA-MAX central lubrication for one gooseneck with standard grease NLGI-2
* Tool kit Art No. 612452
* Multi-coupling hydraulic connections on the gooseneck
* Front bogie with separate air connection for air screwdriver
* BEKA-MAX central lubrication for one 2-axle bogie with standard grease NLGI-2
* One 7-pin socket left and right rear on the front bogie for warning signs
* Screw-in facility (ø approx. 40 mm) every approx. 500 mm on the outside of the upper flange of the outer tube of the excavator deck for bolt-on rings (LC 16,000 daN)
* Foldable width extensions with steel covers, adjustable in width from approx. 2,850 mm to approx. 3,250 mm
* BEKA-MAX central lubrication for one 4-axle bogie with standard grease NLGI-2
* At the rear bogie, a socket for the cable remote control of the steering
Ljdjxbmplepfx Abtoah
* Rear bogie with trough
* Two INOX toolboxes, approx. 855 x 340 x 390 mm, mounted left and right on the gooseneck
* 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery

* Radio remote control:
* Operation of the powerpack, start/stop of the diesel engine
* Control of the steering, in addition to the cable remote control

* One LED work light each left and right at the end plate of the gooseneck with...

دغه اعلان په اتوماتيک ډول ژباړل شوی. د ژباړې تېروتنې کېدای شي موجود وي.