د پر کارپلاتفورم سره نیمه ټرېلرFAYMONVILLE
        MAX Trailer MAX200 Telesattel Megatrailer    
 د پر کارپلاتفورم سره نیمه ټرېلر
FAYMONVILLE
        MAX Trailer MAX200 Telesattel Megatrailer    
                                                     ثابت قیمت د مالياتي ارزښت له مالیې سره علاوه                                            
                                            € ۴۹٬۷۵۰                                    
            حالت        
            استعمال شوی                    
            ځای        
                                                Essen                                            

 انځورونه ښیي            
 نقشه ښکاره کړئ            
د ماشین په اړه معلومات
بیه او موقعیت
                             ثابت قیمت د مالياتي ارزښت له مالیې سره علاوه                    
                            € ۴۹٬۷۵۰                    
- د پلورونکي موقعیت:
-     Heegstraße 6-8, 45356 Essen, جرمني             
 تماس وکړئ            
تخنیکي جزییات
- اعظمي بار وزن:
- ۳۸٬۳۹۰ کيلوګرام
- ټول وزن:
- ۴۸٬۰۰۰ کيلوګرام
- د محور ترتیب:
- ۳ اکسل
- لومړۍ ثبت:
- ۰۳/۲۰۲۴
- راتلونکی تفتیش (TÜV):
- ۰۳/۲۰۲۶
- ټوله پلنوالی:
- ۲٬۵۴۰ م م
- تجهیزات:
- ای بی اس
د وړاندیز توضیحات
- اعلان ID:
- A20421315
- د حوالې شمېره:
- 33271
- تازه کول:
- وروستي ځل په ۰۹.۰۸.۱۴۰۴
تشريح
        You can find our complete range of vehicles, including immediately and short-term available units, on our website.
Excerpt from the equipment list. Full specification available on request.
- Loading platform in extendable design with pneumatically operated locking mechanism
- 2 pairs of lashing rings (LC 5,000 daN)
- 1 pair of lashing rings (LC 10,000 daN)
Rcodpfjxth Adox Ad Rsh
- 6 pairs of outward-folding lashing rings (LC 5,000 daN)
- 2 pairs of outward-folding lashing rings (LC 10,000 daN)
- JOST mechanical landing legs with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load)
- Tyres: 245/70 R 17.5 3PMSF
- BPW axles and suspension
- 2 rigid axles, 1 trailing steered axle
- Air suspension with raise/lower valve
- Brake system in compliance with EU regulations, EBS-E (2S2M)
- Load gauge for axle load measurement, including load chart
- 2-inch kingpin
- One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high
- Galvanized, extendable width extensions, approx. 230 mm per side
- 6 pairs of WADER container pockets in the deck, suitable for 1x20' container, 2 x 20' containers, or 1 x 40' container flush at the rear
- 10 pairs of stake pockets (approx. 100 x 50 mm) in the outer frame of the deck
- 3 crosswise-mounted stake pocket rails (approx. 100 x 50 mm) on the deck
- One transverse INOX toolbox under the loading platform, approx. 565 x 290 x 810 mm
- Mount for ALU loading ramps, transversely under the platform behind the axles
- Adjustable hanging rails for aluminium loading ramps at the rear of the vehicle
- 2 LED reversing lights mounted on the rear panel
- HRM metallic coating (High Resistance Metallisation) of the outer frame
- Single-colour paint finish in RAL 3002 carmine red
دغه اعلان په اتوماتيک ډول ژباړل شوی. د ژباړې تېروتنې کېدای شي موجود وي.
Excerpt from the equipment list. Full specification available on request.
- Loading platform in extendable design with pneumatically operated locking mechanism
- 2 pairs of lashing rings (LC 5,000 daN)
- 1 pair of lashing rings (LC 10,000 daN)
Rcodpfjxth Adox Ad Rsh
- 6 pairs of outward-folding lashing rings (LC 5,000 daN)
- 2 pairs of outward-folding lashing rings (LC 10,000 daN)
- JOST mechanical landing legs with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load)
- Tyres: 245/70 R 17.5 3PMSF
- BPW axles and suspension
- 2 rigid axles, 1 trailing steered axle
- Air suspension with raise/lower valve
- Brake system in compliance with EU regulations, EBS-E (2S2M)
- Load gauge for axle load measurement, including load chart
- 2-inch kingpin
- One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high
- Galvanized, extendable width extensions, approx. 230 mm per side
- 6 pairs of WADER container pockets in the deck, suitable for 1x20' container, 2 x 20' containers, or 1 x 40' container flush at the rear
- 10 pairs of stake pockets (approx. 100 x 50 mm) in the outer frame of the deck
- 3 crosswise-mounted stake pocket rails (approx. 100 x 50 mm) on the deck
- One transverse INOX toolbox under the loading platform, approx. 565 x 290 x 810 mm
- Mount for ALU loading ramps, transversely under the platform behind the axles
- Adjustable hanging rails for aluminium loading ramps at the rear of the vehicle
- 2 LED reversing lights mounted on the rear panel
- HRM metallic coating (High Resistance Metallisation) of the outer frame
- Single-colour paint finish in RAL 3002 carmine red
دغه اعلان په اتوماتيک ډول ژباړل شوی. د ژباړې تېروتنې کېدای شي موجود وي.
عرضوونکی
            یادونه:        وړیا راجستر شئ یا ننوت کړئ، ترڅو ټول معلومات ترلاسه کړئ.    
له دې نیټې راجستر شوی: 2003
پوښتنه واستوئ
تلیفون & فاکس
                            +49 201 8... اعلانونه                
            ستاسو اعلان په بریالیتوب سره پاک شو            
            يوه تېروتنه رامنځته شوه            
















