Tipper semi-trailerFLIEGL
3-Achs Sattelkipper Alu 57 cbm
Tipper semi-trailer
FLIEGL
3-Achs Sattelkipper Alu 57 cbm
EXW ثابت قیمت د مالياتي ارزښت له مالیې سره علاوه
€ ۲۸٬۹۰۰
د جوړېدو کال
۲۰۲۱
حالت
استعمال شوی
ځای
Triptis 

انځورونه ښیي
نقشه ښکاره کړئ
د ماشین په اړه معلومات
- د ماشین نوم:
- Tipper semi-trailer
- تولیدوونکی:
- FLIEGL
- د ماشین شمېره:
- WFDFLT33902029016
- د جوړېدو کال:
- ۲۰۲۱
- حالت:
- استعمال شوی
- فعالیت:
- په بشپړه توګه فعال
بیه او موقعیت
EXW ثابت قیمت د مالياتي ارزښت له مالیې سره علاوه
€ ۲۸٬۹۰۰
- ځای:
- Oberpöllnitzer Straße 8, 07819 Triptis, DE

- کرایه:
- امکان لري
تماس وکړئ
تخنیکي جزییات
- ټول وزن:
- ۳۸٬۰۰۰ کيلوګرام
- تش وزن:
- ۴٬۹۸۳ کيلوګرام
- اعظمي بار وزن:
- ۳۳٬۰۱۷ کيلوګرام
- د بارولو ځای حجم:
- ۵۷ متر مکعب
- لومړۍ ثبت:
- ۱۰/۲۰۲۱
- تعلیق:
- هوا
- رنګ:
- سفید
- د ټایر اندازه:
- 385/65 R22.5"
د وړاندیز توضیحات
- اعلان ID:
- A19490881
- د حوالې شمېره:
- 63776
- تازه کول:
- وروستي ځل په ۰۶.۰۵.۱۴۰۴
تشريح
Hydraulics
Low-pressure cylinder max. 170 bar, smallest section hard-chromed, with HDK screw coupling, fixed component, nominal width 48 mm (without hose connection). Supplied loose!
Operation hydraulically via truck PTO
Bodies
Aluminum box body made of high-quality, wear-resistant material. Slanted front wall 5 mm thick, with external cylinder mount. Side walls made of 30 mm hollow chamber profiles, neatly welded, with top rail profile designed to prevent bulk material deposits. Interior features a ladder at the front wall (not in combination with Cramaro).
Shovel and broom holder mounted externally on the front wall.
Greenline – conical and aerodynamic body design
"Membrane" rear wall
Rear wall suspended with "double-joint hinge" and split 1/2 to 1/2 with two-leaf doors, equipped with swing arms at the top, and one grain chute per door.
Rear wall with rubber seal
Note! Heat resistant up to max. 170°C!
Continuously 6 mm thick floor
Lodjww Icbopfx Ad Eohn
Standing platform with access ladder
Prepared for tarpaulin cover
دغه اعلان په اتوماتيک ډول ژباړل شوی. د ژباړې تېروتنې کېدای شي موجود وي.
Low-pressure cylinder max. 170 bar, smallest section hard-chromed, with HDK screw coupling, fixed component, nominal width 48 mm (without hose connection). Supplied loose!
Operation hydraulically via truck PTO
Bodies
Aluminum box body made of high-quality, wear-resistant material. Slanted front wall 5 mm thick, with external cylinder mount. Side walls made of 30 mm hollow chamber profiles, neatly welded, with top rail profile designed to prevent bulk material deposits. Interior features a ladder at the front wall (not in combination with Cramaro).
Shovel and broom holder mounted externally on the front wall.
Greenline – conical and aerodynamic body design
"Membrane" rear wall
Rear wall suspended with "double-joint hinge" and split 1/2 to 1/2 with two-leaf doors, equipped with swing arms at the top, and one grain chute per door.
Rear wall with rubber seal
Note! Heat resistant up to max. 170°C!
Continuously 6 mm thick floor
Lodjww Icbopfx Ad Eohn
Standing platform with access ladder
Prepared for tarpaulin cover
دغه اعلان په اتوماتيک ډول ژباړل شوی. د ژباړې تېروتنې کېدای شي موجود وي.
عرضوونکی
یادونه: وړیا راجستر شئ یا ننوت کړئ، ترڅو ټول معلومات ترلاسه کړئ.
له دې نیټې راجستر شوی: 2006
پوښتنه واستوئ
تلیفون & فاکس
+49 36482... اعلانونه
ستاسو اعلان په بریالیتوب سره پاک شو
يوه تېروتنه رامنځته شوه






