Semi-trailer with flatbed & tarpaulinFLIEGL
SDS 390 Gardine Standard Ultralight Coil
Semi-trailer with flatbed & tarpaulin
FLIEGL
SDS 390 Gardine Standard Ultralight Coil
EXW ثابت قیمت د مالياتي ارزښت له مالیې سره علاوه
€ ۲۵٬۹۹۰
د جوړېدو کال
۲۰۲۱
حالت
استعمال شوی
ځای
Triptis 

انځورونه ښیي
نقشه ښکاره کړئ
د ماشین په اړه معلومات
- د ماشین نوم:
- Semi-trailer with flatbed & tarpaulin
- تولیدوونکی:
- FLIEGL
- د ماشین شمېره:
- WFDFLT33902029406
- د جوړېدو کال:
- ۲۰۲۱
- حالت:
- نږدې نوی (کارول شوی)
- فعالیت:
- په بشپړه توګه فعال
بیه او موقعیت
EXW ثابت قیمت د مالياتي ارزښت له مالیې سره علاوه
€ ۲۵٬۹۹۰
- ځای:
- Oberpöllnitzer Straße 8, 07819 Triptis, DE

تماس وکړئ
تخنیکي جزییات
- ټول وزن:
- ۳۵٬۰۰۰ کيلوګرام
- تش وزن:
- ۵٬۸۰۰ کيلوګرام
- اعظمي بار وزن:
- ۲۹٬۲۰۰ کيلوګرام
- د محور ترتیب:
- ۳ اکسل
- د بار کولو ځای اوږدوالی:
- ۱۳٬۶۵۰ م م
- د بارولوونکي ځای پلنوالی:
- ۲٬۴۸۰ م م
- د بار کولو ځای لوړوالې:
- ۲٬۷۹۰ م م
- لومړۍ ثبت:
- ۱۲/۲۰۲۱
- تعلیق:
- د هوا لفټ
- رنګ:
- سپین زر
- د ټایر اندازه:
- 385/65 R22.5"
د وړاندیز توضیحات
- اعلان ID:
- A19083991
- د حوالې شمېره:
- 59340
- تازه کول:
- وروستي ځل په ۱۶.۰۲.۱۴۰۴
تشريح
The images are archived; the vehicle may still be in use!
Semi-trailer chassis for freight forwarding
Fine-grain steel welded construction in lightweight design, fifth wheel plate with replaceable 2" kingpin, coil trough approx. 8,040 mm long, 6 coil supports (coil pockets inside 82 x 52 mm), coil cover with screen-printed panels and steel joists, 2 split-belt covers for coil trough, each approx. 293 mm wide, net weight approx. 13 kg per cover, slightly slanted outer frame with "Load-Lock profile" for tensioning straps. Note: To attach the straps in conjunction with the side walls, the side walls must be opened! 9 pairs of 5-ton lashing eyes recessed in the coil trough area, 24-ton 2-speed landing gear, single-side operation, with straight lower section, without thrust compensation. Note: Free support leg corner dimension or free rearward swing radius approx. 1,930 mm, without supports, extension ladder on the Rear, side door catches, 2 wheel chocks with brackets, aluminum side impact protection, bracket transverse to the side member and attached to the side member for supporting aluminum slats, aluminum underride protection, half-shell fenders with anti-spray flaps according to EC regulations, rear bumper, 1 plastic toolbox, 2 pairs of stake pockets recessed into the outer frame, approx. 72 x 42 mm internal dimensions, at positions 1 and 2 according to the old Fliegl stake data sheet, as per AU 19219,
2 stake pockets recessed centrally in the floor, approx. 72 x 42 mm internal dimensions at positions 1 and 2 according to the old Fliegl stake data sheet, as per AU 192198. Note: Stakes pockets/inserted stakes are not designed for the sole load securing of long materials, pipes, etc. without wrapping.
Nedpfxewhp A Do Af Tsdc
Axles + Suspension
SAF disc brake axles with 430 mm disc diameter, "Axle/Chassis" Laser-measured to reduce tire wear and fuel consumption, offset axle spacing 1410/1310 mm (combined transport) up to 44 tonnes gross vehicle weight, air suspension,
without lift axle
These images are archive images; the vehicle may still be in use!
دغه اعلان په اتوماتيک ډول ژباړل شوی. د ژباړې تېروتنې کېدای شي موجود وي.
Semi-trailer chassis for freight forwarding
Fine-grain steel welded construction in lightweight design, fifth wheel plate with replaceable 2" kingpin, coil trough approx. 8,040 mm long, 6 coil supports (coil pockets inside 82 x 52 mm), coil cover with screen-printed panels and steel joists, 2 split-belt covers for coil trough, each approx. 293 mm wide, net weight approx. 13 kg per cover, slightly slanted outer frame with "Load-Lock profile" for tensioning straps. Note: To attach the straps in conjunction with the side walls, the side walls must be opened! 9 pairs of 5-ton lashing eyes recessed in the coil trough area, 24-ton 2-speed landing gear, single-side operation, with straight lower section, without thrust compensation. Note: Free support leg corner dimension or free rearward swing radius approx. 1,930 mm, without supports, extension ladder on the Rear, side door catches, 2 wheel chocks with brackets, aluminum side impact protection, bracket transverse to the side member and attached to the side member for supporting aluminum slats, aluminum underride protection, half-shell fenders with anti-spray flaps according to EC regulations, rear bumper, 1 plastic toolbox, 2 pairs of stake pockets recessed into the outer frame, approx. 72 x 42 mm internal dimensions, at positions 1 and 2 according to the old Fliegl stake data sheet, as per AU 19219,
2 stake pockets recessed centrally in the floor, approx. 72 x 42 mm internal dimensions at positions 1 and 2 according to the old Fliegl stake data sheet, as per AU 192198. Note: Stakes pockets/inserted stakes are not designed for the sole load securing of long materials, pipes, etc. without wrapping.
Nedpfxewhp A Do Af Tsdc
Axles + Suspension
SAF disc brake axles with 430 mm disc diameter, "Axle/Chassis" Laser-measured to reduce tire wear and fuel consumption, offset axle spacing 1410/1310 mm (combined transport) up to 44 tonnes gross vehicle weight, air suspension,
without lift axle
These images are archive images; the vehicle may still be in use!
دغه اعلان په اتوماتيک ډول ژباړل شوی. د ژباړې تېروتنې کېدای شي موجود وي.
عرضوونکی
یادونه: وړیا راجستر شئ یا ننوت کړئ، ترڅو ټول معلومات ترلاسه کړئ.
له دې نیټې راجستر شوی: 2006
پوښتنه واستوئ
تلیفون & فاکس
+49 36482... اعلانونه
ستاسو اعلان په بریالیتوب سره پاک شو
يوه تېروتنه رامنځته شوه








