Double-sided formatter and tenonerGabbiani
T MODUL 72
Double-sided formatter and tenoner
Gabbiani
T MODUL 72
د جوړېدو کال
۱۹۸۲
حالت
استعمال شوی
ځای
Porażyn 

انځورونه ښیي
نقشه ښکاره کړئ
د ماشین په اړه معلومات
- د ماشین نوم:
- Double-sided formatter and tenoner
- تولیدوونکی:
- Gabbiani
- موډل:
- T MODUL 72
- د جوړېدو کال:
- ۱۹۸۲
- حالت:
- استعمال شوی
بیه او موقعیت
- ځای:
- Porażyn 23a, 64-330 Opalenica, PL
تماس وکړئ
د وړاندیز توضیحات
- اعلان ID:
- A18416791
- تازه کول:
- وروستي ځل په ۳۱.۰۶.۱۴۰۴
تشريح
The machine comes from the Italian manufacturer Gabbiani, which is now part of the SCM Group.
The designation T modul 72 in this case refers to a double-end tenoner (format and tenoning machine), which – unlike a conventional panel saw – is designed for shaping and edge processing of wood or wood-based materials.
This particular unit was produced in 1982 (serial number 193035).
The double-end tenoner is used for end/edge processing (e.g., trimming and edge profiling) as well as copying specific shapes on the ends or sides of the workpieces.
Thanks to the built-in copying units, it is possible to accurately reproduce defined profiles (e.g., grooves, tongues, moldings, decorative elements) in series production.
Voltage: 380 V (three-phase)
Frequency: 50 Hz
Laedpfx Abevwbf Dotoh
Rated current: 66 A
Total rated power: 35 kW – allowing intensive operation in workshops with higher production volumes
The 1982 Gabbiani T modul 72 (serial number 193035), configured as a double-end tenoner with shape-copying aggregates, is a sturdy machine suitable for precise edge and end processing of wood-based materials. With its notable power output (35 kW) and advanced tooling heads, it enables high-volume production of various profiles as well as fast, repeatable shaping of edges.
The designation T modul 72 in this case refers to a double-end tenoner (format and tenoning machine), which – unlike a conventional panel saw – is designed for shaping and edge processing of wood or wood-based materials.
This particular unit was produced in 1982 (serial number 193035).
The double-end tenoner is used for end/edge processing (e.g., trimming and edge profiling) as well as copying specific shapes on the ends or sides of the workpieces.
Thanks to the built-in copying units, it is possible to accurately reproduce defined profiles (e.g., grooves, tongues, moldings, decorative elements) in series production.
Voltage: 380 V (three-phase)
Frequency: 50 Hz
Laedpfx Abevwbf Dotoh
Rated current: 66 A
Total rated power: 35 kW – allowing intensive operation in workshops with higher production volumes
The 1982 Gabbiani T modul 72 (serial number 193035), configured as a double-end tenoner with shape-copying aggregates, is a sturdy machine suitable for precise edge and end processing of wood-based materials. With its notable power output (35 kW) and advanced tooling heads, it enables high-volume production of various profiles as well as fast, repeatable shaping of edges.
عرضوونکی
یادونه: وړیا راجستر شئ یا ننوت کړئ، ترڅو ټول معلومات ترلاسه کړئ.
له دې نیټې راجستر شوی: 2018
پوښتنه واستوئ
تلیفون & فاکس
+48 509 8... اعلانونه
ستاسو اعلان په بریالیتوب سره پاک شو
يوه تېروتنه رامنځته شوه