Column drilling machine

HELTOS VS 50 GB

Pillar drill in a sturdy cast iron construction with an electromagnet. Clutch for automatic feed.
Automatic feed with electromagnetic clutch
Automatic overload clutch for the feed, height-adjustable drill head, two-speed motor,
Drill depth adjustment, gear reduction, automatic coolant switchable,
Coolant system consisting of: tank in the base plate, pump with motor protection switch,
complete fitting

Description of the drill:
The VS 50 GB electric drill is designed for drilling, roughing, hole reaming, and threading in single-unit and series production. This machine consists of four main parts: cabinet, column, electrical installation, and cooling system. The spindle housing is adjustable and can be rotated 360° on the column. The model is equipped with a feed. The machine is characterized by its rigid construction and operational reliability. The drill has four feed stages with an electromagnetic clutch. The reduction gear and feed gears are lubricated with oil vapor, which is provided by a pump located in the lower part of the housing. The electromagnetic clutch ensures the tension of the selected feed rate and simultaneously disengages the machine feed when the set drilling depth is reached or when the maximum spindle pressure is exceeded (due to a damaged or blunt tool).
The drilling depth is set on a millimeter scale. The drilling spindle is mounted on ball bearings, and a spiral spring ensures spindle return. The electrical equipment is housed in the electrical housing and fully complies with all EU regulations. The machine controls are located on the front panel.

Technical Specifications:
Drilling capacity in ST60 steel: 40 mm
Drilling capacity in ST60 steel: 50 mm
Drilling capacity in cast iron (EN-GJL-200): 50 mm
Tapping in ST60 steel: M 30
Tapping in cast iron: M 36
Spindle speeds in 18 gear stages: 28–2800 rpm
Feed steps: 4
Knodpfx Abjv U U Imoksc
Feed range: 0.11–0.45 m/rev
Spindle mount: MT 4
Max. spindle stroke: 220 mm
Max. vertical drill head adjustment via rack and pinion: 180 mm
Thrust: Center spindle/column: 305 mm
Column diameter: 140 mm
Max. axial pressure on drill spindle: 11,000 N
Table clamping area: 600 x 490 mm
Distance: spindle to table: 250 mm - 1000 mm
Electric motor - Two-stage:
- Speeds: 700 / 1400 rpm
- Power: 1.5 / 3.0 kW

دغه اعلان په اتوماتيک ډول ژباړل شوی. د ژباړې تېروتنې کېدای شي موجود وي.