Plate Shear - HydraulicLOTZE
201 3000x12
Plate Shear - Hydraulic
LOTZE
201 3000x12
د جوړېدو کال
۱۹۹۵
حالت
استعمال شوی
ځای
جرمني 

انځورونه ښیي
نقشه ښکاره کړئ
د ماشین په اړه معلومات
- د ماشین نوم:
- Plate Shear - Hydraulic
- تولیدوونکی:
- LOTZE
- موډل:
- 201 3000x12
- د جوړېدو کال:
- ۱۹۹۵
- حالت:
- استعمال شوی
بیه او موقعیت
- ځای:
- , جرمني

تماس وکړئ
د وړاندیز توضیحات
- اعلان ID:
- A17914191
- د حوالې شمېره:
- 1087-0104320
- تازه کول:
- وروستي ځل په ۲۲.۰۲.۱۴۰۴
تشريح
Technical details:
sheet width: 3000 mm
plate thickness: 12 mm
distance between columns: 3500 mm
control: Cybelec DNC 10 G
back gauge: 1200 motorisch mm
cutting angle: 1,2 - 2,73 °
Lsdpfx Aevc Amtod Eehn
cutting gap adjustment: ja mm
cutting capacity : 66.000 daN daN
Knife length: 3100 mm
down holder: 17 Stück
interface: RS232
Table dimensions: 3200 x 600 mm
total connected load: 22 kW
weight of the machine ca.: 11,0 + (1,0 to Anbauteile+Zubehör) t
space requirements approx. LxWxH: ca. 4,5 x 2,6 x 2,1 m
transport dimensions LxWxH: ca. 5,0 x 2,25 x 2,2 m
The guillotine shear was put into operation for the first time in 1998.
The DNC 10 G control unit was specially designed for guillotine shears. It has a numerical axis for controlling the backgauge and automatically calculates and regulates the cutting gap, the cutting angle and the cutting depth, taking into account the material to be cut. (Data from the manufacturer)
Table with side stopL:930 x W:105 x H:42 mm
2 table extensions L:1600 x W:100 x 83 mm
Angle fence (attached to table extension)
Operation via control panel with swivel arm and foot control
Equipment:
Drain with rollers for clippings
2x protective grid
*
sheet width: 3000 mm
plate thickness: 12 mm
distance between columns: 3500 mm
control: Cybelec DNC 10 G
back gauge: 1200 motorisch mm
cutting angle: 1,2 - 2,73 °
Lsdpfx Aevc Amtod Eehn
cutting gap adjustment: ja mm
cutting capacity : 66.000 daN daN
Knife length: 3100 mm
down holder: 17 Stück
interface: RS232
Table dimensions: 3200 x 600 mm
total connected load: 22 kW
weight of the machine ca.: 11,0 + (1,0 to Anbauteile+Zubehör) t
space requirements approx. LxWxH: ca. 4,5 x 2,6 x 2,1 m
transport dimensions LxWxH: ca. 5,0 x 2,25 x 2,2 m
The guillotine shear was put into operation for the first time in 1998.
The DNC 10 G control unit was specially designed for guillotine shears. It has a numerical axis for controlling the backgauge and automatically calculates and regulates the cutting gap, the cutting angle and the cutting depth, taking into account the material to be cut. (Data from the manufacturer)
Table with side stopL:930 x W:105 x H:42 mm
2 table extensions L:1600 x W:100 x 83 mm
Angle fence (attached to table extension)
Operation via control panel with swivel arm and foot control
Equipment:
Drain with rollers for clippings
2x protective grid
*
عرضوونکی
یادونه: وړیا راجستر شئ یا ننوت کړئ، ترڅو ټول معلومات ترلاسه کړئ.
پوښتنه واستوئ
تلیفون & فاکس
+49 341 6... اعلانونه
ستاسو اعلان په بریالیتوب سره پاک شو
يوه تېروتنه رامنځته شوه












