Shark

mütek 630 K

Special machine
for shredding plastics
Basic machine from €24,990 net

Well suited for shredding:
- Paper, cardboard boxes, pipes, profiles, boxes, canisters, buckets, cans, sections of wooden pallets, etc.
- Medium-hard thermoplastics such as PVC, PP, PE, PS, PU, PET

Includes:
- special rotor with embedded blades (reduced load capacity),
- small cutting gap between blade and counter blade

Motor: 18.5 kW; 400 V - 50 Hz - 3 ph
Control: PLC

Top cutting unit opening 600 x 800 mm
The parts should be a maximum of approx. 500x500 mm in size
*the height is less important

hydraulically operated slide,
sieve hole of your choice (25 - 40mm)
For plastics, coarser sieves are recommended (30-40 mm)
*If you want to shred more finely, a two-stage shredding process is recommended
with downstream granulator type MVZ (sieves 5-15 mm)

Suction nozzle Ø 160 mm
Weight approx. 1,300 kg
Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm

Other options available for an additional charge:
- Raise the shredder by approx. 25 cm (Preparation for conveyor belt removal) + €995 net
- Angled conveyor belt (discharge height approx. 220 cm) + €8,490 net
- Overband magnet + €6,750 net

- Control of conveyor belt and overband magnet + €2,495 net
(Start and stop synchronized with the chipper)
- Alternatively, manual start and stop on the conveyor belt + €497.50 net

.
Requirements for the raw material:
- The moisture content (atro) must be below 25%
- Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.
.
We would be happy to carry out a free test with your material. We invite you to come to us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos.

---
*only for brittle plastics with a medium degree of hardness,
*not for elastic or extremely hard and heavy plastics - this would affect the durability of the system.
---

Optional would be the next larger machines

Basic machine: Shredder MGZ 830 K-S - 18.5 kW

Cutting unit opening at the top 800 x 1,000 mm
The parts should be a maximum of approx. 720x700 mm
*the height is less relevant

from €39,995 net * Options depending on the effort

Basic machine: Shredder MGZ 1030 K-S - 22 kW

Cutting unit opening at the top 1,000 x 1,000 mm
The parts should be a maximum of approx. 900x700 mm
Lhodpfsd H R Sxjx Ad Esn
*the height is less relevant

from €49,975 net * Options depending on the effort

Basic machine: Shredder MGZ 1330 K-S - 37 kW

Cutting unit opening at the top 1,300 x 1,200 mm
The Parts should be a maximum of approx. 1,200x700 mm in size
*the height is less relevant

from €79,975 net * Options depending on effort

دغه اعلان په اتوماتيک ډول ژباړل شوی. د ژباړې تېروتنې کېدای شي موجود وي.