Hydraulic press

OKS ташор 1671M

The hydraulic two-column assembly and pressing press with a force of 40t OKS 1671M is designed for straightening parts, pressing in and out of sleeves, bushings, bearings, gears, as well as other pressing works during the repair of tractors, cars and agricultural machinery. The press can be used for cutting, bending, drawing and other operations.
Maximum force, kN (tf) – 392(40)
Maximum working pressure in the hydraulic system, MPa (kgf/cm2) – 20(200)
Piston stroke, mm – 250
Piston speed during the working stroke, mm/s – 5
Maximum distance between the table and the piston, mm – 1000
Maximum table travel, mm – 750
Lhedpfx Adowbz Irj Ejn
Dimensions of clearances between the posts, mm:
from front to back – 250
from left to right – 1000
Dimensions of the table support plates, mm – 400х450
Working fluid – industrial oil I20A GOST 20799-75
Pump type – eccentric three-plunger
Feed, l/min – 5
Nominal speed, rpm – 1500
Power consumption, kW – 3
Overall dimensions, mm – 1575х640х1970
Weight, kg – 645