BalerPaal - Kadant
Pacomat 1S
Baler
Paal - Kadant
Pacomat 1S
EXW VB د مالياتي ارزښت له مالیې سره علاوه
€ ۲۱٬۵۰۰
د جوړېدو کال
۱۹۹۰
حالت
استعمال شوی
ځای
Langenfeld (Rheinland) 

انځورونه ښیي
نقشه ښکاره کړئ
د ماشین په اړه معلومات
- د ماشین نوم:
- Baler
- تولیدوونکی:
- Paal - Kadant
- موډل:
- Pacomat 1S
- د ماشین شمېره:
- 25038
- د جوړېدو کال:
- ۱۹۹۰
- حالت:
- استعمال شوی
- فعالیت:
- په بشپړه توګه فعال
بیه او موقعیت
EXW VB د مالياتي ارزښت له مالیې سره علاوه
€ ۲۱٬۵۰۰
- ځای:
- Langenfeld (Rheinland), جرمني

تماس وکړئ
تخنیکي جزییات
- د ډکولو خلاصون پلنوالی:
- ۶۵۰ م م
- د د ډکولو خلاصیدو اوږدوالی:
- ۸۰۰ م م
- د کتاب اوږدوالی:
- ۱٬۲۰۰ م م
- د بالو پلنوالی:
- ۷۰۰ م م
- د بالو لوړوالی:
- ۱٬۰۰۰ م م
- د بيل وزن:
- ۷۰۰ کيلوګرام
- ټوله پلنوالی:
- ۴٬۲۷۰ م م
- ټوله لوړوالی:
- ۲٬۰۰۰ م م
- ټول اوږدوالی:
- ۵٬۵۵۰ م م
- د ننوتي برېښنا جريان ډول:
- د هوا سړونکی
- د برېښنا داخل ولتاژ:
- ۳۸۰ V
- بریښنایی فیوز:
- ۷۵ A
د وړاندیز توضیحات
- اعلان ID:
- A19142711
- د حوالې شمېره:
- Paal's-Presse, blau
- تازه کول:
- وروستي ځل په ۲۴.۰۲.۱۴۰۴
تشريح
Type: Paal Pacomat 1S, built in 1990 (including dust extraction)
Negotiable price: upon request - after inspection
Availability: immediately, the press has been professionally dismantled and stored off-site
Location: Langenfeld / Rhineland (area: Düsseldorf / Cologne)
The space required for the press is approximately 8 m x 6 m, height approximately 5 m (as we had it set up, see pictures below).
If the dust extraction system is not installed, approximately 2 m can be saved in width. 8 m remains.
The bales measure 80 x 80 cm, and the length is adjustable. The wire binding is automatic.
We had bales approximately 100 - 120 cm long and weighed approximately 700 kg.
Prsdpfx Ajwkhb Dod Usc
The system was located in a printing plant (now closed) and was mostly used in one (few) shifts, and therefore has a low operating hourly rate. (Unfortunately, we don't have exact details, as the press is located out of the factory.)
The press is equipped with an automatic twisting system, a dust extraction system from Höcker-Polytechnik, and a piping system.
دغه اعلان په اتوماتيک ډول ژباړل شوی. د ژباړې تېروتنې کېدای شي موجود وي.
Negotiable price: upon request - after inspection
Availability: immediately, the press has been professionally dismantled and stored off-site
Location: Langenfeld / Rhineland (area: Düsseldorf / Cologne)
The space required for the press is approximately 8 m x 6 m, height approximately 5 m (as we had it set up, see pictures below).
If the dust extraction system is not installed, approximately 2 m can be saved in width. 8 m remains.
The bales measure 80 x 80 cm, and the length is adjustable. The wire binding is automatic.
We had bales approximately 100 - 120 cm long and weighed approximately 700 kg.
Prsdpfx Ajwkhb Dod Usc
The system was located in a printing plant (now closed) and was mostly used in one (few) shifts, and therefore has a low operating hourly rate. (Unfortunately, we don't have exact details, as the press is located out of the factory.)
The press is equipped with an automatic twisting system, a dust extraction system from Höcker-Polytechnik, and a piping system.
دغه اعلان په اتوماتيک ډول ژباړل شوی. د ژباړې تېروتنې کېدای شي موجود وي.
عرضوونکی
یادونه: وړیا راجستر شئ یا ننوت کړئ، ترڅو ټول معلومات ترلاسه کړئ.
له دې نیټې راجستر شوی: 2016
پوښتنه واستوئ
تلیفون & فاکس
+49 2103 ... اعلانونه
ستاسو اعلان په بریالیتوب سره پاک شو
يوه تېروتنه رامنځته شوه


