Broaching machine

Rausch RS 6G

Rausch RS 6G (WAG 855) Vertical Internal Broaching Machine

Manufacturer: Rausch (Haan/Rhineland)
Model: RS 6G / 1000 Machine No.: 51039/373
Year of manufacture: 1968 Weight: 800 kg
Revision: December 2024 by Wiemers AG

General / Technical Specifications:
Completely overhauled, mechanical vertical broaching machine
Rausch RS 6G, unused with "CE" marking
Tensile force: 60 kN (6,000 kg)
Broaching speeds: 3 m/min and 6 m/min
Return speed: 6 m/min
Max. stroke: 1000 mm
Max. tool length: 1200 mm
Table dimensions / work surface: 610 x 470 mm / 520 x 320 mm
Table opening: Ø 90mm for standard broaching mandrels
Workpiece diameter: any
Dimensions (h x w x d): 1600mm x 850mm x 1000mm (h = table height to floor without attachments)
Motor power: 4.4kW / 5.5kW Power supply: 400V / 50Hz

Features:
Guedpfev Rmvzox Abksh
- Geared motor drive with 2 working speeds
- Reinforced drawbridge made of tool steel for greater pulling forces
- Safety door with automatic door locking and safety interlock
- New chip chute with tool storage option
- Protective cover for the stroke adjustment
- Oil-tight storage on the control cabinet
- Electrical scanning of the clamping jaws (tool removal control to prevent unintentional retraction of the drawbridge, providing additional safety for the operator and tools)
- Integrated coolant system with electrically switched solenoid valve and drain cock
- Coolant swivel system, with automatic coolant switching via the swivel system
- Chip sieve with magnet
- Externally adjustable tool length adjustment system (reproducible across all machines)
- Stainless steel control panel with durable markings
- 4 central lubrication points for the trapezoidal spindle drive with manual grease gun

Note:
The machine has been completely overhauled. During the overhaul, the machine base, machine body, and machine table were completely reconditioned. All wear parts have been replaced. The machine has been updated to the state of the art and complies with current CE regulations.
The machine is marked with a CE certificate.

General
The double spindle drive ensures a smooth and central pull point and a constant broaching speed (broaching speed optionally at 3 m/min or 6 m/min).
Due to its design, the machine can be quickly and easily set up for broaching with flat broaching tools for keyways.
The universal design of the drawbar and machine table allows broaching with profile and flat broaching tools without the use of additional drawing heads.
Broaching tools and broaching mandrels suitable for the machine are available on request.

دغه اعلان په اتوماتيک ډول ژباړل شوی. د ژباړې تېروتنې کېدای شي موجود وي.