S-60K (6)Riko Ekos d.o.o
S-60K (6)
S-60K (6)
Riko Ekos d.o.o
S-60K (6)
د جوړېدو کال
۲۰۱۹
حالت
استعمال شوی
ځای
جرمني 

انځورونه ښیي
نقشه ښکاره کړئ
د ماشین په اړه معلومات
- د ماشین نوم:
- S-60K (6)
- تولیدوونکی:
- Riko Ekos d.o.o
- موډل:
- S-60K (6)
- د جوړېدو کال:
- ۲۰۱۹
- حالت:
- ښه (استعمال شوی)
- فعالیت:
- په بشپړه توګه فعال
- د عملیاتي ساعتونو:
- ۲٬۳۲۰ h
بیه او موقعیت
- ځای:
- , جرمني
تماس وکړئ
تخنیکي جزییات
- د فشار ځواک:
- ۶۰ t
- د ډکولو خلاصون پلنوالی:
- ۱٬۱۰۰ م م
- د د ډکولو خلاصیدو اوږدوالی:
- ۱٬۴۰۰ م م
- د بالو پلنوالی:
- ۷۲۰ م م
- د بالو لوړوالی:
- ۱٬۱۰۰ م م
- ټول وزن:
- ۱۲٬۵۰۰ کيلوګرام
- د تیلو د ټانک ظرفیت:
- ۸۰۰ ل
- توان:
- ۳۷ کیلو واټ (۵۰٫۳۱ اسبه قوه)
د وړاندیز توضیحات
- اعلان ID:
- A17766636
- تازه کول:
- وروستي ځل په ۳۰.۰۸.۱۴۰۳
تشريح
Technical data baler:
Manufacturer Riko Ekos d.o.o
Type S-60K (6)
Year of construction 2019
Operating hours 2,320 hours, as of August 24
Number of pressed bales 4,359 bales, as of August 24
Pressing force main press 60 tonnes
Dimensions of feed chute 1,100 x 1,400 mm
Filling volume / pressing cycle 2.1 m³
Bale dimensions 720 x 1,100 mm (W x H), the length is variable
Drive power 37 kW
Connected load, total 47 kW
Tying 4-fold horizontal, fully automatic
Throughput capacity with a
bulk density of 30 kg/cbm approx. 5 - 6 tonnes/hour
Bulk weight of 50 kg/cbm approx. 9 - 11 tonnes/hour
Bulk weight of 100 kg/cbm approx. 15 - 19 tonnes/hour
Filling volume of hydraulic oil tank 800 litres
PLC control Siemens SIMATIC S7-1200
Siemens SIMATIC HMI control panel
Press dimensions assembled without hopper and chute 12,220 x 3,654 x 2,685 mm (L x W x H)
Effective transport dimensions excluding press, with dismantled tying system 7,230 x 1,750 x 2,685 mm (L x W x H)
Transport weight press 12.5 tonnes
Condition of the baler:
The machine is part of a sorting line and was only partially used for pressing individual material flows. The machine is now no longer needed and has therefore been sold. However, the baler is regularly put into operation once a week for two to three bales so that the machine remains in working order. Due to the extremely low operating hours, the baler is in good condition and ready for immediate use.
Scope of delivery for the baler:
1 piece baler without conveyor belt, hopper and chute
8 pieces wire pulling stations, without wire
1 piece bale chute
1 set of machine documentation
Kedju Thipjpfx Abkodu
Comments:
The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.
Manufacturer Riko Ekos d.o.o
Type S-60K (6)
Year of construction 2019
Operating hours 2,320 hours, as of August 24
Number of pressed bales 4,359 bales, as of August 24
Pressing force main press 60 tonnes
Dimensions of feed chute 1,100 x 1,400 mm
Filling volume / pressing cycle 2.1 m³
Bale dimensions 720 x 1,100 mm (W x H), the length is variable
Drive power 37 kW
Connected load, total 47 kW
Tying 4-fold horizontal, fully automatic
Throughput capacity with a
bulk density of 30 kg/cbm approx. 5 - 6 tonnes/hour
Bulk weight of 50 kg/cbm approx. 9 - 11 tonnes/hour
Bulk weight of 100 kg/cbm approx. 15 - 19 tonnes/hour
Filling volume of hydraulic oil tank 800 litres
PLC control Siemens SIMATIC S7-1200
Siemens SIMATIC HMI control panel
Press dimensions assembled without hopper and chute 12,220 x 3,654 x 2,685 mm (L x W x H)
Effective transport dimensions excluding press, with dismantled tying system 7,230 x 1,750 x 2,685 mm (L x W x H)
Transport weight press 12.5 tonnes
Condition of the baler:
The machine is part of a sorting line and was only partially used for pressing individual material flows. The machine is now no longer needed and has therefore been sold. However, the baler is regularly put into operation once a week for two to three bales so that the machine remains in working order. Due to the extremely low operating hours, the baler is in good condition and ready for immediate use.
Scope of delivery for the baler:
1 piece baler without conveyor belt, hopper and chute
8 pieces wire pulling stations, without wire
1 piece bale chute
1 set of machine documentation
Kedju Thipjpfx Abkodu
Comments:
The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.
اسناد
عرضوونکی
یادونه: وړیا راجستر شئ یا ننوت کړئ، ترڅو ټول معلومات ترلاسه کړئ.
له دې نیټې راجستر شوی: 2017
پوښتنه واستوئ
تلیفون & فاکس
+31 597 2... اعلانونه
ستاسو اعلان په بریالیتوب سره پاک شو
يوه تېروتنه رامنځته شوه