Temperature chamberRS-Simulatoren
TS1000/70-10K
Temperature chamber
RS-Simulatoren
TS1000/70-10K
حالت
استعمال شوی
ځای
Borken 

انځورونه ښیي
نقشه ښکاره کړئ
د ماشین په اړه معلومات
بیه او موقعیت
- ځای:
- Einsteinstraße 8a, 46325 Borken, DE
تماس وکړئ
د ماشین پلور

ایا تاسو خپله کارول شوې ماشین لا دمخه اعلان کړې ده؟
د Machineseeker له لارې پرته له کمیسیون څخه وپلورئ.
د ماشینونو پلور په اړه نور معلومات
د ماشینونو پلور په اړه نور معلومات
د وړاندیز توضیحات
- اعلان ID:
- A18745376
- د حوالې شمېره:
- 15825
- تازه کول:
- وروستي ځل په ۲۸.۱۲.۱۴۰۳
تشريح
RS Simulators
Water-cooled temperature test chamber
New generation rod program controller (SE-702 with touch panel and data logger for measurement recording)
Filter dryer, refrigeration oil, and refrigerant (R23/3.25 kg and R452a/12 kg) new upon delivery, including a leak test, oil strainers, and sight glasses replaced
The chamber is supplied with an RMS substructure, a frame for holding the test sample, and a separate control panel
(Pure RMS housing, NO shaker included!)
The special feature: the RMS substructure can be extended like a shaker using a pallet truck. This
facilitates a possible test setup outside the cabinet. Measurement lines can also be routed to the outside via a
duct in the base plate of the RMS substructure.
The system includes a compressed air dryer, also known as a dew protection device, which prevents condensation during the heating phase
Dkedov Rcbaspfx Agqsu
(commonly found in electronics tests) Application)
Test chamber dimensions: Height approx. 1000mm / Width approx. 1400mm / Depth approx. 900mm
Temperature range: -70°C to +180°C
Current consumption: approx. 100 A
Total power: approx. 50 kVA
Cooling and heating capacity: 10 K/min
Since the chambers are overhauled and converted, the delivery time from the date of purchase is approx. 8-10 weeks!!
Type: TS1000/70-10K
For your safety, please note the following information!
The following steps are carried out on our offered chambers in advance:
1. Functional testing and replacement of necessary components
2. Refilling with legally compliant refrigerant
3. Leak test with certificate
4. After successful testing, the chambers are subjected to a test run monitored by calibrated equipment.
Condition: Used
Scope of delivery: (Temperature chamber TS1000/70-10K, without test chamber contents, without shaker)
(Subject to change and errors in the technical specifications, information is subject to change!)
We are happy to answer any further questions you may have over the phone.
دغه اعلان په اتوماتيک ډول ژباړل شوی. د ژباړې تېروتنې کېدای شي موجود وي.
Water-cooled temperature test chamber
New generation rod program controller (SE-702 with touch panel and data logger for measurement recording)
Filter dryer, refrigeration oil, and refrigerant (R23/3.25 kg and R452a/12 kg) new upon delivery, including a leak test, oil strainers, and sight glasses replaced
The chamber is supplied with an RMS substructure, a frame for holding the test sample, and a separate control panel
(Pure RMS housing, NO shaker included!)
The special feature: the RMS substructure can be extended like a shaker using a pallet truck. This
facilitates a possible test setup outside the cabinet. Measurement lines can also be routed to the outside via a
duct in the base plate of the RMS substructure.
The system includes a compressed air dryer, also known as a dew protection device, which prevents condensation during the heating phase
Dkedov Rcbaspfx Agqsu
(commonly found in electronics tests) Application)
Test chamber dimensions: Height approx. 1000mm / Width approx. 1400mm / Depth approx. 900mm
Temperature range: -70°C to +180°C
Current consumption: approx. 100 A
Total power: approx. 50 kVA
Cooling and heating capacity: 10 K/min
Since the chambers are overhauled and converted, the delivery time from the date of purchase is approx. 8-10 weeks!!
Type: TS1000/70-10K
For your safety, please note the following information!
The following steps are carried out on our offered chambers in advance:
1. Functional testing and replacement of necessary components
2. Refilling with legally compliant refrigerant
3. Leak test with certificate
4. After successful testing, the chambers are subjected to a test run monitored by calibrated equipment.
Condition: Used
Scope of delivery: (Temperature chamber TS1000/70-10K, without test chamber contents, without shaker)
(Subject to change and errors in the technical specifications, information is subject to change!)
We are happy to answer any further questions you may have over the phone.
دغه اعلان په اتوماتيک ډول ژباړل شوی. د ژباړې تېروتنې کېدای شي موجود وي.
عرضوونکی
یادونه: وړیا راجستر شئ یا ننوت کړئ، ترڅو ټول معلومات ترلاسه کړئ.
پوښتنه واستوئ
تلیفون & فاکس
+49 2861 ... اعلانونه
ستاسو اعلان په بریالیتوب سره پاک شو
يوه تېروتنه رامنځته شوه