8-spindle automatic chucking automatSchütte
ADH 160
8-spindle automatic chucking automat
Schütte
ADH 160
د جوړېدو کال
۱۹۸۱
حالت
استعمال شوی
ځای
Hövelhof 

انځورونه ښیي
نقشه ښکاره کړئ
د ماشین په اړه معلومات
- د ماشین نوم:
- 8-spindle automatic chucking automat
- تولیدوونکی:
- Schütte
- موډل:
- ADH 160
- د ماشین شمېره:
- 225
- د جوړېدو کال:
- ۱۹۸۱
- حالت:
- استعمال شوی
بیه او موقعیت
- ځای:
- Mergelweg 206, 33161 Hövelhof, DE
تماس وکړئ
د وړاندیز توضیحات
- اعلان ID:
- A7750655
- د حوالې شمېره:
- WKG 386
- تازه کول:
- وروستي ځل په ۲۵.۰۴.۱۴۰۳
تشريح
Manufacturer: Schütte
Type: ADH 160
Machine No.: 225
Year of manufacture: 1981
Weight: 11t
General / technical data:
max. turning length: 125mm
max. workpiece diameter: 168mm
max. drilling depth: 125mm
adjustable number of pieces: from 3,4 to 450 sec.
working hours: 8.200h
working spindle speed: from 90 to 1120 rpm
footprint (l x w x h): approx. 4730 x 1700 x 2120mm
power supply: 380V / 50Hz
Accessories:
7 cross slide
8 longitudinal slides
Thread cutting device
4x 2-jaw chuck Ø160mm
chuck type: pull chuck with clamping diameter 15
Chuck type: Röhm 0W-406 682 Clamping force 1200 da N
4x 3-jaw chuck Ø160mm
Chuck type: Draw chuck with clamping diameter 15
Chuck type: Röhm 1W-406 681 Clamping force 1800 da N
Insertion arm over chuck 100mm.
The workpiece is fed to the insertion arm by a swivel arm and rotary gripper.
Isdpfeipu U Uex Abkotn
Remark:
The machine is in very good condition and has very few operating hours.
The machine is set up for crankshaft halves for small combustion engines.
Type: ADH 160
Machine No.: 225
Year of manufacture: 1981
Weight: 11t
General / technical data:
max. turning length: 125mm
max. workpiece diameter: 168mm
max. drilling depth: 125mm
adjustable number of pieces: from 3,4 to 450 sec.
working hours: 8.200h
working spindle speed: from 90 to 1120 rpm
footprint (l x w x h): approx. 4730 x 1700 x 2120mm
power supply: 380V / 50Hz
Accessories:
7 cross slide
8 longitudinal slides
Thread cutting device
4x 2-jaw chuck Ø160mm
chuck type: pull chuck with clamping diameter 15
Chuck type: Röhm 0W-406 682 Clamping force 1200 da N
4x 3-jaw chuck Ø160mm
Chuck type: Draw chuck with clamping diameter 15
Chuck type: Röhm 1W-406 681 Clamping force 1800 da N
Insertion arm over chuck 100mm.
The workpiece is fed to the insertion arm by a swivel arm and rotary gripper.
Isdpfeipu U Uex Abkotn
Remark:
The machine is in very good condition and has very few operating hours.
The machine is set up for crankshaft halves for small combustion engines.
اسناد
عرضوونکی
یادونه: وړیا راجستر شئ یا ننوت کړئ، ترڅو ټول معلومات ترلاسه کړئ.
له دې نیټې راجستر شوی: 2003
پوښتنه واستوئ
تلیفون & فاکس
+49 5257 ... اعلانونه
ستاسو اعلان په بریالیتوب سره پاک شو
يوه تېروتنه رامنځته شوه