Gantry Milling Machine

WALDRICH COBURG GM 600/30000

Waldrich Coburg GM 600/30000 CNC Gantry Milling Machine (1979, retrofitted in 2004)
Gksdpfxoxnc Ukj Abkjc

Operation System SIEMENS 840; Technical Specifications: Fixed table length 36,000 mm, Fixed table width 6,000 mm; Distance between columns with covers 6,900 mm, without covers 7,100 mm; Gantry travel 30,000 mm; Cross rail travel 3,100 mm; Milling heads (right and left) travel on cross rail 7,400 mm; Vertical travel of right and left rams 1,000 mm; Gantry work feeds 0–6,000 mm/min; Gantry rapid feed 10,000 mm/min; Milling heads (right and left) work feeds 0–3,000 mm/min; Milling heads (right and left) rapid feed 3,000 mm/min; Vertical rams (right and left) work feeds 0–2,000 mm/min; Vertical rams (right and left) rapid feed 2,000 mm/min; Cross rail fine positioning 0–750 mm/min; Cross rail rapid feed 1,000 mm/min; Fine positioning for work axes 5 mm/min; Main spindles (right and left) speed range on 3 steps 4–475 rpm; Taper of milling spindles ISO 60; Manual 12-head changing system with 8 sets of milling heads; Diameter of milling-spindle nose 221.44 mm; Fixed Table PMM GM600-30000 4,500 × 30,000 mm.

Machine dimensions L × W × H 43,000 × 12,000 × 10,000 mm; The lot is dismantled and stored in 8 stacks as seen in pictures. The lot was carefully dismantled, and main connection points were marked with red coded labels. The larger parts of the machines are strategically placed at the location to allow easy loading access. The lot contains a total of 16 tables, each with approximate dimensions of L = 6,000 mm and W = 2,000 mm. Most of the machine components are stored in a separate room and are laid out over a total length of approximately 30,000 mm.