Circular sawmill

Walter Circular sawmil TTPP 450-700

The horisontal circular saw mill is designed for the production of radial sawn edged boards and beams from coniferous and hardwood logs by longitudinal sawing with two circular saws in both directions (without idling) at an angle of 90 °.
Sawing is performing by movable carriage which is running alongside a fixed log. The log sawing scheme is chosen by the operator individually, based on the shift task and rational log cutting optimization, depending on its diameter.

DISTINCTIVE FEATURES:
- No need for logs sorting;
- Individual sawing scheme for each log;
- The possibility of sawing logs with a diameter of 150 to 1000 mm;
- Efficient output up to 70%;
- High productivity – up to 20 m³/shift (counting by raw roundwood).

SPECIFICATION:
Dimensions (for a cutting length of 6 m):
Length: 3320 mm
Width: 2220 mmHight: 2130 mm
Track length: 13380 mm

Cutting parameters:
Max. log diameter: 1000 mm
Min.log length: 2000 mm
Max. dimension of the cut element: 200 x 200 mm (possibility of increasing the dimension 270x240)
Circular saw diameter: 450 - 700 mm

Motors:
Main motors power x2: 12 - 23,8 kW
Shaft rotation speed: 1400 rpm

Feeding system
Feeding motor power: 1,5 kW
Feeding motor rotational speed: 1450 rpm
Feeding speed: 0-30 m / min
Dodpfov D Rwvex Agqoku

*Using saws with a diameter of ø 450 mm, we can get a size max. 150x150 mm, with a saws with a diameter of 550 mm we get max. 200x200 mm, and in the version with a saw ø 630 we get a size of 240x240 mm., With a saw ø 700 the get an ability to increase the size to 270x240.