Lead/traction spindle latheWeiler
Commodor Geometrisch Überholt
Lead/traction spindle lathe
Weiler
Commodor Geometrisch Überholt
حالت
استعمال شوی
ځای
Ubstadt-Weiher 

انځورونه ښیي
نقشه ښکاره کړئ
د ماشین په اړه معلومات
- د ماشین نوم:
- Lead/traction spindle lathe
- تولیدوونکی:
- Weiler
- حالت:
- نږدې نوی (کارول شوی)
- فعالیت:
- په بشپړه توګه فعال
بیه او موقعیت
- ځای:
- Großer Sand 19-21, 76698 Ubstadt-Weiher, DE
تماس وکړئ
د وړاندیز توضیحات
- اعلان ID:
- A18287011
- تازه کول:
- وروستي ځل په ۲۸.۱۰.۱۴۰۳
تشريح
Weiler Commodor guide and feed spindle lathe with 3-axis digital display K&C NEW Overhauled with acceptance certificate for tolerances of new machines
Technical data:
>> Machine no. 1824
>> Center height 180 mm
>> Center width 1000 mm
>> Spindle speeds: from 13 to 2000 rpm
>> Spindle passage 56 mm
>> Short taper spindle head DIN 55029 size 5
Isdovrcqdopfx Abkobc
>> Tailstock MK 4
>> Feed rates from 0.026 to 0.888 mm / rev
>> Possible threads metric, inch, module and diametric pitch
>> Metric thread pitches from 0.35 to 12 mm
>> Weight approx. 1500 kg
>> Spindle brake can be switched on
>> Drive power 2.0/4.0 KW
>> Length 2.2 m, height 1.5 m, depth 1 m
Accessories and equipment:
>> 3-axis digital display from K&C New, 12-month manufacturer's guarantee with operating instructions
Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pcs., cone calculation, radius / diameter, quick zeroing, switching of the counting direction,
>> Three-jaw chuck wedge bars as good as new 200mm 1 set of jaws
>> Mulifix size B with 2 pcs steel holders NEW
>> Bed stop
>> Machine feet
>> Coolant system
>> LED machine lamp
For safety, the machine is equipped with:
>> Electronic spindle protection
>> Spindle brake
>> 2 emergency stops
On request: covers for the guide. and feed spindle
About the machine:
A Weiler Commodor guide and feed spindle lathe is offered in a geometrically overhauled condition. The guides have been reground or re-scraped. With acceptance according to the test report. 2K glossy white paint.
The Multifix and chuck accessories are new.
For safety: The machine has a brake motor, electronic spindle protection and two emergency stops - an absolutely new lathe. Even at high speeds, the Weiler runs very quietly. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site under power and see for yourself its condition.
دغه اعلان په اتوماتيک ډول ژباړل شوی. د ژباړې تېروتنې کېدای شي موجود وي.
Technical data:
>> Machine no. 1824
>> Center height 180 mm
>> Center width 1000 mm
>> Spindle speeds: from 13 to 2000 rpm
>> Spindle passage 56 mm
>> Short taper spindle head DIN 55029 size 5
Isdovrcqdopfx Abkobc
>> Tailstock MK 4
>> Feed rates from 0.026 to 0.888 mm / rev
>> Possible threads metric, inch, module and diametric pitch
>> Metric thread pitches from 0.35 to 12 mm
>> Weight approx. 1500 kg
>> Spindle brake can be switched on
>> Drive power 2.0/4.0 KW
>> Length 2.2 m, height 1.5 m, depth 1 m
Accessories and equipment:
>> 3-axis digital display from K&C New, 12-month manufacturer's guarantee with operating instructions
Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pcs., cone calculation, radius / diameter, quick zeroing, switching of the counting direction,
>> Three-jaw chuck wedge bars as good as new 200mm 1 set of jaws
>> Mulifix size B with 2 pcs steel holders NEW
>> Bed stop
>> Machine feet
>> Coolant system
>> LED machine lamp
For safety, the machine is equipped with:
>> Electronic spindle protection
>> Spindle brake
>> 2 emergency stops
On request: covers for the guide. and feed spindle
About the machine:
A Weiler Commodor guide and feed spindle lathe is offered in a geometrically overhauled condition. The guides have been reground or re-scraped. With acceptance according to the test report. 2K glossy white paint.
The Multifix and chuck accessories are new.
For safety: The machine has a brake motor, electronic spindle protection and two emergency stops - an absolutely new lathe. Even at high speeds, the Weiler runs very quietly. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site under power and see for yourself its condition.
دغه اعلان په اتوماتيک ډول ژباړل شوی. د ژباړې تېروتنې کېدای شي موجود وي.
عرضوونکی
یادونه: وړیا راجستر شئ یا ننوت کړئ، ترڅو ټول معلومات ترلاسه کړئ.
له دې نیټې راجستر شوی: 2007
پوښتنه واستوئ
تلیفون & فاکس
+49 7251 ... اعلانونه
دغه اعلانونه هم ښايي ستاسو علاقه پیدا کړي.
کوچنی اعلان

۵٬۰۶۳ km
WeilerCommodor Geometrisch Überholt
ستاسو اعلان په بریالیتوب سره پاک شو
يوه تېروتنه رامنځته شوه