Lead/traction spindle latheWeiler
Primus Tischdrehmaschine
Lead/traction spindle lathe
Weiler
Primus Tischdrehmaschine
VB د مالياتي ارزښت له مالیې سره علاوه
€ ۱۲٬۵۰۰
حالت
استعمال شوی
ځای
Ubstadt-Weiher 

انځورونه ښیي
نقشه ښکاره کړئ
د ماشین په اړه معلومات
- د ماشین نوم:
- Lead/traction spindle lathe
- تولیدوونکی:
- Weiler
- حالت:
- ډېر ښه (استعمال شوی)
- فعالیت:
- په بشپړه توګه فعال
بیه او موقعیت
VB د مالياتي ارزښت له مالیې سره علاوه
€ ۱۲٬۵۰۰
- ځای:
- Großer Sand 19-21, 76698 Ubstadt-Weiher, DE
تماس وکړئ
د وړاندیز توضیحات
- اعلان ID:
- A18829986
- تازه کول:
- وروستي ځل په ۰۸.۰۱.۱۴۰۴
تشريح
Weiler Primus guide and feed spindle table lathe in excellent condition!
Technical specifications:
>> Machine no. 2801
>> Center height 120 mm
>> Center distance 430 mm
>> Speed: 60 - 3000 rpm in 18 gear steps
>> Spindle bore 23 mm
Kedpfx Abjv Tyzcokodu
>> Short-taper spindle head DIN 55027
>> Tailstock MT 2
>> Feed rates from 0.03 to 0.15 mm/rev
>> Possible thread sizes: metric, inch, module, and diametrical pitch
>> Metric thread pitches from 0.25 to 2.5 mm
>> Length 1.2 m, height 1.3 m, depth 0.65 m
Accessories and equipment:
>> 1 x Röhm 125 mm three-jaw chuck with 4 sets of jaws
>> Collet chuck with collets from 2 mm to 12 mm, increments of 1 mm Drawbar
>> Multifix size A with 4 tool holders
>> Change gears
>> Fixed steady rest
>> Faceplate
>> Spindle cover
>> Clamping tool
About the machine:
Offered is a Weiler Primus table lathe with guide rail and drawbar in very good condition. The machine is fully functional. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus comes from a state-owned company where it was used little. This newer generation of Weiler lathes is very user-friendly, and surfaces can be produced with a polished finish. Take advantage of the opportunity to view this machine on-site under power and see for yourself its condition. (The base cabinet is included; the machine is not bolted to the machine.)
A digital display is available for an additional charge.
دغه اعلان په اتوماتيک ډول ژباړل شوی. د ژباړې تېروتنې کېدای شي موجود وي.
Technical specifications:
>> Machine no. 2801
>> Center height 120 mm
>> Center distance 430 mm
>> Speed: 60 - 3000 rpm in 18 gear steps
>> Spindle bore 23 mm
Kedpfx Abjv Tyzcokodu
>> Short-taper spindle head DIN 55027
>> Tailstock MT 2
>> Feed rates from 0.03 to 0.15 mm/rev
>> Possible thread sizes: metric, inch, module, and diametrical pitch
>> Metric thread pitches from 0.25 to 2.5 mm
>> Length 1.2 m, height 1.3 m, depth 0.65 m
Accessories and equipment:
>> 1 x Röhm 125 mm three-jaw chuck with 4 sets of jaws
>> Collet chuck with collets from 2 mm to 12 mm, increments of 1 mm Drawbar
>> Multifix size A with 4 tool holders
>> Change gears
>> Fixed steady rest
>> Faceplate
>> Spindle cover
>> Clamping tool
About the machine:
Offered is a Weiler Primus table lathe with guide rail and drawbar in very good condition. The machine is fully functional. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus comes from a state-owned company where it was used little. This newer generation of Weiler lathes is very user-friendly, and surfaces can be produced with a polished finish. Take advantage of the opportunity to view this machine on-site under power and see for yourself its condition. (The base cabinet is included; the machine is not bolted to the machine.)
A digital display is available for an additional charge.
دغه اعلان په اتوماتيک ډول ژباړل شوی. د ژباړې تېروتنې کېدای شي موجود وي.
عرضوونکی
یادونه: وړیا راجستر شئ یا ننوت کړئ، ترڅو ټول معلومات ترلاسه کړئ.
له دې نیټې راجستر شوی: 2007
پوښتنه واستوئ
تلیفون & فاکس
+49 7251 ... اعلانونه
ستاسو اعلان په بریالیتوب سره پاک شو
يوه تېروتنه رامنځته شوه