Lead/traction spindle latheWeiler
Primus GS
Lead/traction spindle lathe
Weiler
Primus GS
VB د مالياتي ارزښت له مالیې سره علاوه
€ ۱۴٬۵۰۰
حالت
استعمال شوی
ځای
Ubstadt-Weiher 

انځورونه ښیي
نقشه ښکاره کړئ
د ماشین په اړه معلومات
- د ماشین نوم:
- Lead/traction spindle lathe
- تولیدوونکی:
- Weiler
- موډل:
- Primus GS
- حالت:
- ډېر ښه (استعمال شوی)
- فعالیت:
- په بشپړه توګه فعال
بیه او موقعیت
VB د مالياتي ارزښت له مالیې سره علاوه
€ ۱۴٬۵۰۰
- ځای:
- Großer Sand 19-21, 76698 Ubstadt-Weiher, DE
تماس وکړئ
د وړاندیز توضیحات
- اعلان ID:
- A18092236
- تازه کول:
- وروستي ځل په ۳۰.۰۹.۱۴۰۳
تشريح
Weiler Primus GS lead and feed screw lathe 3 axis digital readout Easson- ES8
from training workshop Super condition !!!
Technical data:
>> Year of construction approx. 1990 Machine no. 3768
>> Center height 120 mm
>> Center width 430 mm
>> Speed: 60 - 3000 rpm in 18 gear steps
>> Spindle clearance 23 mm
>> Short taper spindle head DIN 4
>> Tailstock MK 2
>> Feed rates from 0.03 to 0.15 mm /rev
>> Possible threads metric, inch, module and diametral pitch
>> Metric thread pitches from 0.25 to 2.5 mm
>> Weight approx. 360 kg
>> Length 1.2 m, height 1.3 m, depth 0.65 m
Kedpfovkfhpjx Abkedu
Accessories and equipment:
>> 3-axis digital display from Easson ES8
>> collet chuck device from 1 to 20 mm collets 1 mm rising with holder and draw tube
>> 1 three-jaw chuck with 2 sets of jaws
>> 1 four-jaw chuck with 2 sets of jaws
>> Mulifix size A with 3 steel holders
>> Bed stop
>> Turning device
To the machine :
We are offering a Weiler Primus lathe built around 1990 in excellent condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The bed guides are in very good condition. The Weiler runs smoothly even at high speeds. The machine comes from a training workshop of a large company. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if ground. Take the opportunity to inspect this machine on site under power and see for yourself its condition.
دغه اعلان په اتوماتيک ډول ژباړل شوی. د ژباړې تېروتنې کېدای شي موجود وي.
from training workshop Super condition !!!
Technical data:
>> Year of construction approx. 1990 Machine no. 3768
>> Center height 120 mm
>> Center width 430 mm
>> Speed: 60 - 3000 rpm in 18 gear steps
>> Spindle clearance 23 mm
>> Short taper spindle head DIN 4
>> Tailstock MK 2
>> Feed rates from 0.03 to 0.15 mm /rev
>> Possible threads metric, inch, module and diametral pitch
>> Metric thread pitches from 0.25 to 2.5 mm
>> Weight approx. 360 kg
>> Length 1.2 m, height 1.3 m, depth 0.65 m
Kedpfovkfhpjx Abkedu
Accessories and equipment:
>> 3-axis digital display from Easson ES8
>> collet chuck device from 1 to 20 mm collets 1 mm rising with holder and draw tube
>> 1 three-jaw chuck with 2 sets of jaws
>> 1 four-jaw chuck with 2 sets of jaws
>> Mulifix size A with 3 steel holders
>> Bed stop
>> Turning device
To the machine :
We are offering a Weiler Primus lathe built around 1990 in excellent condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The bed guides are in very good condition. The Weiler runs smoothly even at high speeds. The machine comes from a training workshop of a large company. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if ground. Take the opportunity to inspect this machine on site under power and see for yourself its condition.
دغه اعلان په اتوماتيک ډول ژباړل شوی. د ژباړې تېروتنې کېدای شي موجود وي.
عرضوونکی
یادونه: وړیا راجستر شئ یا ننوت کړئ، ترڅو ټول معلومات ترلاسه کړئ.
له دې نیټې راجستر شوی: 2007
پوښتنه واستوئ
تلیفون & فاکس
+49 7251 ... اعلانونه
دغه اعلانونه هم ښايي ستاسو علاقه پیدا کړي.
کوچنی اعلان

۴٬۹۷۷ km
WEILERLZ PRIMUS GS
کوچنی اعلان

۴٬۹۲۰ km
WEILERPrimus GS 4443
کوچنی اعلان

۵٬۰۶۳ km
WeilerPrimus GS
ستاسو اعلان په بریالیتوب سره پاک شو
يوه تېروتنه رامنځته شوه