Lead/traction spindle latheWeiler
Primus GS
Lead/traction spindle lathe
Weiler
Primus GS
VB د مالياتي ارزښت له مالیې سره علاوه
€ ۱۴٬۵۰۰
حالت
استعمال شوی
ځای
Ubstadt-Weiher 

انځورونه ښیي
نقشه ښکاره کړئ
د ماشین په اړه معلومات
- د ماشین نوم:
- Lead/traction spindle lathe
- تولیدوونکی:
- Weiler
- موډل:
- Primus GS
- حالت:
- ډېر ښه (استعمال شوی)
- فعالیت:
- په بشپړه توګه فعال
بیه او موقعیت
VB د مالياتي ارزښت له مالیې سره علاوه
€ ۱۴٬۵۰۰
- ځای:
- Großer Sand 19-21, 76698 Ubstadt-Weiher, DE
تماس وکړئ
د وړاندیز توضیحات
- اعلان ID:
- A19143361
- تازه کول:
- وروستي ځل په ۲۴.۰۲.۱۴۰۴
تشريح
Weiler Primus GS guide and feed spindle lathe in very good original condition!
Technical specifications:
>> Year of manufacture approx. 1992 Machine no. 4549
>> Center height 120 mm
>> Center width 430 mm
>> Speed: 60 - 3000 rpm in 18 gear steps
>> Spindle bore 23 mm
>> Short taper spindle head DIN 4
>> Tailstock MT 2
>> Feed rates from 0.03 to 0.15 mm/rev
>> Possible thread sizes: metric, inch, module, and diametrical pitch
>> Metric thread pitches from 0.25 to 2.5 mm
>> Switchable spindle brake
>> Weight approx. 360 kg
>> Length 1.2 m, height 1.3 m, depth 0.65 m
Accessories and equipment:
Kdsdpfx Abewkh Abjkou
>> New collet chuck system, new collets from 3 to 25 mm
>> 1 piece Three-jaw chuck with 2 sets of jaws
>> Mulifix size A with 2 tool holders
About the machine:
Offered is a Weiler Primus GS guide and feed spindle lathe in very good original condition. The machine is fully functional. All slides run very smoothly and evenly. The bed guides are in excellent condition. The Weiler runs very quietly even at high speeds. The Primus was used in a training facility. This newer generation of Weiler lathes is very user-friendly and can produce surfaces that look as if they were ground. Take advantage of the opportunity to view this machine on-site with power on and see for yourself its condition.
دغه اعلان په اتوماتيک ډول ژباړل شوی. د ژباړې تېروتنې کېدای شي موجود وي.
Technical specifications:
>> Year of manufacture approx. 1992 Machine no. 4549
>> Center height 120 mm
>> Center width 430 mm
>> Speed: 60 - 3000 rpm in 18 gear steps
>> Spindle bore 23 mm
>> Short taper spindle head DIN 4
>> Tailstock MT 2
>> Feed rates from 0.03 to 0.15 mm/rev
>> Possible thread sizes: metric, inch, module, and diametrical pitch
>> Metric thread pitches from 0.25 to 2.5 mm
>> Switchable spindle brake
>> Weight approx. 360 kg
>> Length 1.2 m, height 1.3 m, depth 0.65 m
Accessories and equipment:
Kdsdpfx Abewkh Abjkou
>> New collet chuck system, new collets from 3 to 25 mm
>> 1 piece Three-jaw chuck with 2 sets of jaws
>> Mulifix size A with 2 tool holders
About the machine:
Offered is a Weiler Primus GS guide and feed spindle lathe in very good original condition. The machine is fully functional. All slides run very smoothly and evenly. The bed guides are in excellent condition. The Weiler runs very quietly even at high speeds. The Primus was used in a training facility. This newer generation of Weiler lathes is very user-friendly and can produce surfaces that look as if they were ground. Take advantage of the opportunity to view this machine on-site with power on and see for yourself its condition.
دغه اعلان په اتوماتيک ډول ژباړل شوی. د ژباړې تېروتنې کېدای شي موجود وي.
عرضوونکی
یادونه: وړیا راجستر شئ یا ننوت کړئ، ترڅو ټول معلومات ترلاسه کړئ.
له دې نیټې راجستر شوی: 2007
پوښتنه واستوئ
تلیفون & فاکس
+49 7251 ... اعلانونه
دغه اعلانونه هم ښايي ستاسو علاقه پیدا کړي.
کوچنی اعلان

۴٬۹۷۷ km
WEILERLZ PRIMUS GS
کوچنی اعلان

۴٬۹۲۰ km
WEILERPrimus GS 4443
کوچنی اعلان

۵٬۰۶۳ km
WeilerPrimus GS
ستاسو اعلان په بریالیتوب سره پاک شو
يوه تېروتنه رامنځته شوه